Recording On Md - Kenwood HM-383MD Instruction Manual

Recording on MD

30
Recording in LP modes based on ATRAC3 (MDLP) is possible with all of the MD recording functions of
the unit. For recording playback of a CD onto an MD, see "Convenient recording Methods".
Stop the recording
In the direction of the arrow
Select an input source other
than "MD"
Example:
To select the CD input
CD
6
Pause the recording
1. Make the preparations for recording.
1
Open the write protect tab of the Mini Disc to make it
recordable. l
2
Load the Mini Disc.
The MD cannot be loaded or ejected while the unit is in standby mode.
Do not force load a MD in standby mode, otherwise malfunction will
result.
2. Select the source to be recorded.
CD
TAPE
TUNER (Broadcasts) : Only analog recording
AUX (External input) : Only analog recording [Adjusting the AUX in-
2 2
÷ If a CD or tape has already been loaded, it starts to play now.
Press the 7 STOP key to stop it.
÷ Even when the CD contains the recording of CD-TEXT data, the data is not
copied onto the MD.
÷ If the CD input is selected, the digital input is recorded automatically.
Pause the recording
2 2
1 1
5 5
Stop the recording
: Only digital recording
: Only analog recording
put level Ø]
C D
Recording on MD
4 4
The character information display shows
the recording input source.
q