Cd Program Recording (Tape B Only) - Kenwood XD-A950DV Instruction Manual

CD Program Recording (TAPE B only)

46
This unit can only use tape for the normal position (Type I ).
CD Program recording is not possible for VCD, DVD discs.
Preparation
See "Preparation" on page 44.
1
Select reverse mode
MAIN UNIT
REVERSE MODE
2
Select tape transport direction, then
press the STOP ( 7 ) key.
TAPE B
MAIN UNIT
2 3
STOP
7
3
Playback a disc, then press the STOP
( 7 ) key.
MAIN UNIT
DVD/CD
STOP
7
4
Edit program
See page 28
REMOTE
SHIFT
5
Press the REC/ARM key
MAIN UNIT
REC/ARM
e
e
REMOTE
TAPE B
23
STOP
REMOTE
DVD/CD
6
STOP
DVD PGM
EQ
Each press switches the modes as follows
1 "
" : The recording will end and the tape will stop at the
end in reverse direction, no matter whether record-
ing was started in forward direction or in reverse
direction.
2 "
" :
In recording mode, this is the same as "
3 "
" :
Record stops after having recorded one side of tape.
÷ If the tape transport direction is opposite to the desired direction,
press the play key corresponding to this.
Tape direction indicators of
currently selected deck.
Lit
XD-DV series (EN/K,M,T,X,Y)/2
".