Table of Contents
Advertisement
76
3
Select the broadcast station (only when
TUNER is selected above).
(1) Select the preset station No.
set / demo
(2) Set it.
÷ When the timer setting is completed by pressing the
set/demo key, "COMPLETE !" is displayed.
÷ When "PLAY" is selected, the timer playback will
start at the volume setting used at the moment the
unit is set to the Standby mode.
To check or modify the reservation contents, restart the timer reservation from the beginning.
5
Reserve the timer operation.
6
Put the unit in standby mode.
TIMER
POWER
3
Select the broadcast station (only when
TUNER is selected above).
(1) Select the preset station No.
set / demo
(2) Set it.
4
Select the recording equipment.
(1) Select.
set / demo
(2) Set it.
÷ When the timer setting is completed by pressing
the set/demo key, "COMPLETE !" is displayed.
÷ The sound is muted during timer recording. If you
want to monitor the recorded sound, turn the vol-
ume/multi control knob (or press the VOLUME
key on the remote) to adjust the volume.
Each press switches the timer as follows.
1 "O.T.T."
2 "PROG. 1"
1
2"
3 "PROG.
4 "PROG. 1 2"
5 Extinguished
÷ Press the TIMER key on the remote repeatedly until
"PROG. 1", "PROG.
1
2" or "PROG. 1 2" lights.
÷ To cancel timer reservation after it has been activated,
press the TIMER key while the unit is on so that all of the
timer-related indicators are turned off. (The setting made
above is still left in memory.)
÷ When the unit enters the Standby mode, the standby/
timer indicator lights in green.
÷ If there is a power failure or the power cord is un-
plugged after the timer reservation has been activated,
the standby/timer indicator blinks in green. In this
case, the clock setting should be restarted from the
beginning.
Timer operation
1 "TAPE REC"
2 "MD REC"
Advertisement
Table of Contents
