Recording Desired Cd Tracks In A Desired Order Onto Tape (Cd Program Recording) - Kenwood NV-500 Instruction Manual

Recording desired CD tracks in a desired order onto tape
The desired tracks in a CD can be programmed in
a desired order and recorded.
÷ This function is available only when the CD
player is in stop mode.
Preparation
÷ Perform step 3 ( "Select the tape transport direc-
tion") on page 26.
÷ Perform steps 2 to 4 of "Selecting the reverse
mode" on page 25.
1 Display the "Function" menu.
CURSOR
2 Select the message to be
displayed, "CD Tape
Rec".
CURSOR
3 Select the "Program Rec".
CURSOR
4 Program CD tracks.
Follow 5 to 7 in step 1 on
page 32.
5 Start recording
SET
SET
SET
ENTER
Convenient Recording Methods
(CD program recording)
Number of programmed CD tracks,
total play time of the program
To stop operation in the middle
Press the HOME key to abort and cancel the
operation and return to the basic screen.
39
CURSOR
ENTER
SET