Table of Contents
Advertisement
RPU500-Tx User Manual
Aux con.:
To set jack 3.5mm audio connector as auxiliary input or as headphone output.
Aux gain:
To adjust audio level on the auxiliary input (from 0 to 38 dB, 2 dB step)
Input mix:
To define audio inputs and mix different audio sources
(MIC/AUX/REC/MIC+AUX/MIC+REC/AUX+REC)
Compander:
To select audio compander. Firmware version v1.0 supports only ENS compander. Other
companders will be available very soon.
Options menu:
To set the factory parameters select the Factory submenu.
10
Thanks to the Option menu is possible to verify:
- Information of device (Serial, Hw version, Fw version)
- Status of the device (alarms, RF diagnostic, Supply diagnostic, Battery
status)
The Display sub-menu allows to change display parameters like brightness
and timeout.
Advertisement
Table of Contents
Need help?
Do you have a question about the RPU500-Tx and is the answer not in the manual?