Table of Contents
Advertisement
EN
7
Software Installation
Use the configuration tool WLVCM on the attached CD for parametering the WLVCM.
First start the installation routine „WLVC_ml_setup_1.0.1.0.exe"; the installation assistant will open
automatically (see figure 5) and will guide you through the actual installation after you have selected the
language.
Figure 6 – Installation assistant for installing the WLVCM configuration tool
Installing the WLVCM configuration tool will be automatically followed by the installation of the USB
driver (FTDI CDM Drivers / install_driver.exe) which is required for the communication between the
WLVCM and your Windows operating system. Please follow the instructions of the installation assistant
which will guide you through the complete installation routine.
Operating Manual WLVCM-BA-10
Page 21 of 37
Hide quick links:
Advertisement
Table of Contents
