Loading / Saving - Walther Systemtechnik WLVCM Operating Manual

8 Start of Operation and Parametering
EN
Configuration Tool WLVCM – Area Communication WLVCM
The area "Communication WLVCM" (see also figure 6) offers you two different function ranges. On the
one hand, you are able to transfer the configured settings for application and heating parameters into
the WLVCM, or you can save these on a data carrier (see also chapter 8.5.1). On the other hand, you
can also test previously selected application parameters (see also chapter 8.5.2). Please use the
buttons "loading/saving" and "parameter test" for switching from one subsection to the other.

8.4.10 Loading / Saving

There are different functions in the area „loading/saving". Figure 14 gives you an overview. The required
buttons and their function are explained in detail in table 10 below:
Button
Write all sentences ➀
Read all sentences ➀
Write current sentence ➁
Read current sentence ➁
Save total config. ➂
Load total config. ➂
Page 30 of 37
Figure 15 – Functions for Loading/Saving
Function
Transfers the complete configuration, i.e. all parameter sets and the
heating parameters from the configuration tool WLVCM into the
WLVCM module.
Transfers the complete configuration, i.e. all parameter sets and the
heating parameters from the WLVCM module into the WLVCM
configuration tool.
Transfers the parameters of the current configuration view on the left
screen half (application and heating parameters) into the WLVCM
module.
Reads the parameters of the current configuration view on the left
screen half, i.e. the heating parameters or the application parameters
from a selected set of parameters from the WLVCM module and
transfers them into the configuration tool WLVCM.
Saves the complete configuration, i.e. all parameter sets and the
heating parameters from the configuration tool WLVCM onto a data
carrier.
Loads a previously saved complete configuration from a data carrier
into the configuration tool WLVCM.
Table 10 - Buttons and functions for "Loading / Saving"
Operating Manual WLVCM-BA-10