Mechanical Installation - Walther Systemtechnik WLVCM Operating Manual

5 Mechanical Installation

EN
5 Mechanical Installation
The WLVCM comes with a fixing unit on the back for mounting on DIN profiled rails. The WLVCM will
be horizontally installed on the profiled rail using the fixing unit. Please refer to the below figure 1 for the
dimensions which have to be considered.
Page 14 of 37
IMPORTANT
The WLVCM can only be used as a built-in device in a switch cabinet.
Installation position is horizontal with the electrical interfaces [W4], [W5] and [W6]
facing upwards.
Mounting clearance:
Make sure that there is a clearance to other assembly groups of 40 cm above and
below the device in order to guarantee an optimum cable conduct.
Figure 2 – Dimensions of the WLVCM
Operating Manual WLVCM-BA-10