Controller Fine Adjustment - Atmos Scope Operating Instructions Manual

4.0 Operation

4.1.2 Controller fine adjustment

Generally the product does not need to be configured. However the user has the option to make fine adjustments.
• Turn the controller off by pressing the ON/OFF switch
• Press and hold either button A
• Release button A 4 or B
• By pressing button A 4
• By pressing button B 5
• When all the settings are accepted, please select "exit and save" with the button A
• The settings menu is then hidden.
SET-UP menu options
"SHOW/HIDE FREQUENCY"
"STROBOFUNCTION MANUAL/ AUTO"
"SWITCH FUNCTIONS"
"COLOUR-SATURATION"
"FACTORY RESET"
"EXIT"
"SAVE AND EXIT"
4 or B 5 and turn controller ON. The Set-up menu will appear on the monitor.
5 .
, the various setting options can be selected.
the selected function can be activated.
Show or hide the stroboscopy frequency on the monitor
Manual Mode: The stroboscopy function is activated by operating the foot
switch. If the stroboscope is not yet synchronized with the voice frequency,
minimal image inference may occur.
Automatic Mode: The stroboscopy function begins once the system is
synchronized with the voice frequency.
Assigns different functions to buttons.
Adjusts the colour saturation of the images in 5 steps
Returns the settings back to the factory values
Closes the menu and returns to live image without saving the settings
Saves the new settings, closes the menu and returns to the live image
14 .
4 and confirm with button B 5 .
15