Table of Contents
Advertisement
220
4.6.5.4 Linear titration
If linear titration control was selected, you have to define the step size (Fig. 155).
Fig. 155
Linear step size can be set from 0.0005 to 5.000 ml (Fig. 156)
Fig. 156
Linear step width can also be set for End-Point titration (pH, mV and dead stop).
In this type of titration, linear step width is used after the first continuous titration stage.
4.6.5.5 Titration direction
The titration direction can be set to «increase» or «decrease» (Fig. 157).
Fig. 157
Example:
increase
decrease
total acidity titration to a pH value of 8.1 using NaOH
titrating for the alkalinity ("m value") to a pH value of 4.5 using HCl
Advertisement
Table of Contents
