Table of Contents
Advertisement
165
Following the optional input of additional parameter, press <ESC> to leave the reagents menu (Fig. 22).
Important for KF:
The approximate concentration of the KF titrant (e.g. 5 or 2) should be entered under «Concentration».
Thereby the drift in µg/min can be calculated in the right dimensions.
Fig. 22
You will be prompted for a confirmation of the values (Fig. 23).
Fig. 23
If you selected «Yes», the values will be written into the interchangeable unit.
In the left bottom of the display will show the new name of the reagent (Fig. 24).
Fig. 24
Advertisement
Table of Contents
