Xylem TitroLine 7800 Operating Manual page 32

176
<MODE>/F6 leads you to the select method menu (Fig. 44).
Fig. 44
Existing methods can be selected by pressing <↓> and <↑> and confirming the selection with <ENTER>/<OK>.
Once the selection made, you will return to the main menu with the newly selected method.
If no method is selected <ESC> will also take you back to the main menu.
To navigate directly to the system settings (Fig. 45 and Fig. 46) you can use the <SYS>/F7 key;
you can also navigate there through the method selection menu.
Fig. 45
Fig. 46