Table of Contents
Advertisement
Enter the password two times and confirm with <ENTER>/<OK> (Fig. 270).
Fig. 270
Go back to the main menu with <ESC>.
You are logged in as administrator and have full access to all levels and menus.
You can see the user name at the bottom line of the display. Here in the example (Fig.10) it is «ad» (Fig. 271).
Fig. 271
As administrator you have the rights to create new users with different levels.
If you start the titrator now you have to activate the user with crtl+L.
Without one active user it is not possible to work properly with the device!
Possible are only
the change of the exchange heads
the FILL function works
and the F10 DOS function works
When you have entered the user name and password you have full access to all menus.
265
Advertisement
Table of Contents
