Cm220 Right Angle Mounting Kit Mounted To A Crossarm - Campbell 05103 Product Manual

the data logger has been programmed to measure wind direction as
described in Appendix C, Wind Direction Sensor Orientation
7. Use the torpedo level to ensure that the wind monitor is level.
8. Route the sensor cable along the underside of the crossarm to the tripod or
tower, and to the instrument enclosure.
9. Secure the cable to the crossarm and tripod or tower by using cable ties.
FIGURE 7-1. CM220 Right Angle Mounting Kit mounted to a crossarm
Wind Monitor Series
Crossarm
.
(p. C-1)
CM220
9