Identity Code For Dswb - ProMinent DULCODOS DSWb SP10 Assembly And Operating Instructions Manual

1.2 Identity code for DSWb

Metering system DSWb
DSWb
Metering pump/nominal width of pipework
SP10 Solenoid metering pump (BT4b/ BT5b/ DLTa/ GMXa), DN10
S110 Sigma 1/DN10
S115 Sigma 1/DN15
S215 Sigma 2/DN15
S220 Sigma 2/DN20
S325 Sigma 3/DN25
S332 Sigma 3/DN32
Pipework/Function
1 PVC/1P-1D (1 pump, 1 point of injection)
2 PVC/2P-1D (2 pumps, 1 point of injection)
3 PVC/2P-2D (2 pumps, 2 points of injection)
4 PP/1P-1D
5 PP/2P-1D
6 PP/2P-2D
Seal
E EPDM
B FPM
Adhesive
0 no adhesive (PP)
T Tangit
®
D Tangit
®
Mounting frame/Mounting cabinet:
0 Mounting frame without protection 0.8x1.2x0.45 m
1 Mounting frame without protection 1.0x1.4x0.45 m
2 Mounting frame without protection 1.2x1.6x0.65 m
3 Mounting frame without protection 1.6x2.0x0.65 m
4 Mounting frame with protection 0.8x1.2x0.45 m
5 Mounting frame with protection 1.0x1.4x0.45 m
6 Mounting frame with protection 1.2x1.6x0.65 m
7 Mounting cabinet 1.2x1.6x0.65 m
8 Mounting cabinet 1.6x2.0x0.65 m
Design
0 with ProMinent logo
1 without ProMinent logo
Pulsation damper
0
1
DTX
®
none
1 x pulsation damper (type: SP10)
About this product
5