LEGRAND Intuity Home Automation System Installation Manual page 50


If using the TL280-RE Communicator Board – Enter [425] and hit 1 on the keypad
to enable Serial Communication.

Enter [#][#][#] to save all settings and exit programming mode
NOTE: If using an older version of the communicator prior to v5.0, the number selection for
accessing the Integration Account Code will be [651] and the selection for accessing the
Integration Access Code will be [652].
NOTE: Using an older revision of the communicator may also affect compatibility with certain
models of the DSC Power Series Neo Security Panels.
NOTE: After making the changes for the TL280RE Communicator board, it may be necessary to
reboot the security controller before adding the security panel to the Intuity System.
301 Fulling Mill Road, Suite G
Middletown, PA 17057
46
Page
(800) 321-2343
©Copyright 2015 by Legrand,
Inc All Rights Reserved.
www.legrand.us