LEGRAND Intuity Home Automation System Installation Manual page 49


Segment 1: Select options 2, 5, 6, 7, 8 (2 and 7 will be selected by default)

Segment 2: Use Default (1 and 2 will be selected)
3. Programming the Command/Request Enables (4 Segments):

Segment 1: Use Default (2, 4, 5, 6, 7 and 8 will be selected)

Segment 2: Use Default (1, 2, 3, 4, and 5 will be selected)

Segment 3: Use Default (1 will be selected)

Segment 4: Select options 4, 5, 6 and 7 (4 and 7 will be selected by default)
4. LCD Keypad Address (1 Segment) – Use Default (Address 192)
Next, program the security panel according to the user manual. From any keypad enter [*][8] + Go
to Program Code (9713 default). Enter the address 0# for the control panel. Finally, Location 23 –
Segment 1- Enable option 1 to allow quick arm.
NOTE: For further assistance with Security Configuration, contact Legrand Technical
Support or the Security System Installer.
DSC Power Series NEO:
This guide assumes that the programming in the panel is set to the default for all settings. The
default installer's code is 5555. It also assumes that v5.0 of the Communicator is being used.
1. Enable the Alternate Communicator

From the keypad Enter [*][8][Installer Code]

Enter [382] to program communicator option 3

Scroll over to option 5 using the arrow keys and hit [*] enable

Enter [#] to save settings and back out to the main screen
2. Configure the Alternate Communicator

From the main programming screen enter [851] to program the alternate
communicator

Enter [006] for the subsection System Toggle Option 2

Disable option 1 and 2 and enable option 8. Leave all other settings at their default
level – The output should show - - 3 - - - - 8

Enter [#] to save settings and back out to the alternate communicator programming
screen

Enter [422] for the subsection Integration Account Code

Write down the 12 digit number assigned to this communicator for use in configuring
Intuity in the next step

Enter [#] to back out to the alternate communicator programming screen

Enter [423] for the subsection Integration Access Code

Program any 8 digit number in this section bt make sure to write it down for use in
configuring Intuity in the next section
301 Fulling Mill Road, Suite G
Middletown, PA 17057
45
Page
(800) 321-2343
©Copyright 2015 by Legrand,
Inc All Rights Reserved.
www.legrand.us