Table of Contents
Advertisement
To add the security subsystem to Intuity, open the home page of the browser and click on "Device
Assistant" (1), then click "Add Device" (2) and then click "Add Manually" (3).
Click on "Security Alarm Device" adapter and then click "Add".
The security system will then be discovered and added to the "List of Devices". Press "Done" to
finish. The Intuity system will automatically configure all partitions and sensors that have been
programmed on the Interlogix and Honeywell panels.
NOTE: For the DSC Power Series Neo the adapter will be installed but no zones or partitions will
be added automatically. The Integration Account Code and Integration Access Code must be
entered in the configuration page of the adapter. To complete the configuration:
1. Go to "Device Assistant" from the home page.
2. Select "List of Devices".
3. Select the "Security Alarm Adapter"
1
2
47
Page
301 Fulling Mill Road, Suite G
Middletown, PA 17057
(800) 321-2343
3
©Copyright 2015 by Legrand,
Inc All Rights Reserved.
www.legrand.us
Advertisement
Table of Contents
