Table of Contents
Advertisement
For NEST Thermostat:
Before beginning, install and configure the Nest Thermostat(s) according to the instructions
included with the device.
NOTE: Make sure that the Nest Thermostat is connected via WiFi to the same network in
the home as the Intuity Controller.
Then open the main page of the browser and tap on "Device Assistant" (1), then tap "Add
Device" (2) and then tap on "Add Manually" (3).
Select the "NEST" Adapter, and press the "Add" button.
Next, walk through the steps to pair the Nest Thermostat(s) with the Nest app. Instructions on
how to do so will be supplied with thermostat. This step will require an account to be created
with Nest. Once the username and password has been registered with Nest, press the
"Authorize" button in the Intuity app to allow the Intuity Controller to connect to the Nest
Thermostat(s).
1
2
Page
301 Fulling Mill Road, Suite G
Middletown, PA 17057
38
(800) 321-2343
3
©Copyright 2015 by Legrand,
Inc All Rights Reserved.
www.legrand.us
Advertisement
Table of Contents
