Add Wifi To Z-Wave Bridge To Intuity System - LEGRAND Intuity Home Automation System Installation Manual

NOTE: If the Home's WiFi password is entered incorrectly, the Bridge will need to be
reset to factory default. There is no visual indication on the User Interface (except the
middle LED on the Bridge will not change to solid and will continue to blink rapidly).
(Refer to Appendix A1)
NOTE: Don't forget to change the Notebook, Tablet, or Laptop's WiFi back to the Home's
WiFi network once the provisioning process is complete.
NOTE: If the SSID or WiFi Password is changed in the Home, the WiFi Bridge will need to
be reset to factory default and re-provisioned with the new SSID or Password. (Refer to
Appendix A
NOTE: It is highly recommended that the bridge firmware is updated to the latest version
for best WiFi functionality. For directions on how to update the bridge to the latest
firmware, please see Support Bulletin P/N
website. ** As of Intuity release 2.1.1, bridge updates will happen automatically and will
not require manual updating. **

6.2.2 Add WiFi to Z-Wave Bridge to Intuity System

Step 1 - To add the WiFi to Z-Wave Bridge to the Intuity System, open the home page of the
web browser. Click on "Device Assistant" (1), then click "Add Device" (2), and then click "Add
Manually" (3).
SB035
1
2
28
Page
available on the http://legrand.us
301 Fulling Mill Road, Suite G
Middletown, PA 17057
(800) 321-2343
3
©Copyright 2015 by Legrand,
Inc All Rights Reserved.
www.legrand.us