Related Manuals for LEGRAND Intuity Home Automation System
Summary of Contents for LEGRAND Intuity Home Automation System
- Page 1 Intuity Home Automation System Installation Manual 1308240 REV. H 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343 www.legrand.us...
- Page 2 These Class B digital apparatus comply with Canadian ICES-003. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343 www.legrand.us...
-
Page 3: Table Of Contents
6.4.1 Prior to Adding Shades ................. 42 6.4.2 Adding Shades ..................... 42 7.0 Adding Wired Devices ....................44 7.1 Adding a Security Subsystem ................44 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343... - Page 4 8.1 Creating a Doorbell Notification Activity ..............52 Appendix A: FAQ ......................56 Appendix B: Advanced System Commissioning ............59 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343...
-
Page 5: Introduction
1.1 Intuity System Overview The Legrand Intuity Home Automation System provides a convenient means for integrating a home’s subsystems, such as Digital Audio, Security, Video Door Entry, Lighting Control, Cameras, etc. Monitoring and Control is provided from a built-in Command Center in the home, or remotely from a customer’s mobile device or tablet, each with the same consistent, intuitive app. -
Page 6: Prerequisites
1.2 Prerequisites In order for the Legrand Intuity Home Automation System to function, it requires Internet service and a Wireless Access Point connected to the same LAN as the HA7000 Intuity Controller. NOTE: Please refer to the Builder IT department on this requirement to ensure the system can be commissioned using the existing network in a Model Home/Design Center environment for demonstration purposes. - Page 7 The Homes WiFi network (SSID) must be broadcasting (visible) in order to provision WiFi to RFLC and WiFi to Z-Wave bridges to the network It is recommended that the installer download and install the Legrand Intuity App (via the Apple App Store or the Google Play Store) on the Homeowners iOS/Android device(s) for them, (for example an iPad Mini 1, 2, or 3 to be used in the HA7110 Command Center).
-
Page 8: Physical Installation
Legrand recommends using the homeowner’s ISP (Internet Service Provider) WiFi Modem/Router for the Legrand Intuity and Digital Audio Systems. If the ISP supplied Network Appliance is a modem only (no router), a list of compatible routers can be found at http://www.legrand.us/onq/router-... -
Page 9: Intuity System
Mini. NOTE: Only the iPad Mini 1, 2 and 3 are compatible with the Legrand HA7110 Command Center. The iPad Mini 4 and other Android tablets are not able to be mounted into this device. -
Page 10: Bridges
1507221) for the HA7020 and (P/N 1507222) for the HA7040. NOTE: Bridges require 2.4GHz WiFi (B,G,N or AC) network. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343 www.legrand.us... -
Page 11: Digital Audio Subsystem
2.3 Digital Audio Subsystem The Legrand Digital Audio Subsystem consists of several components, including the AU7000 Digital Audio Distribution Module, AU7004 Audio Expansion Module, the AU7001 Digital Audio Input Module, AU7010 and High Performance AU7050 Amplified Keypads, AU7007 Global and... -
Page 12: Intercom Subsystem
2.4 Intercom Subsystem The Legrand Intercom Subsystem consists of several components, including the IC5010 Selective Call 8-Location Distribution Module, IC5000 Room Unit, IC5002 Door Unit, IC5003 Video Door Unit, IC5004 Patio Unit and IC7000 Broadcast Room Unit. The IC5010 is installed in... -
Page 13: Security Subsystem
2.5 Security Subsystem The Legrand Intuity Home Automation System is designed to integrate with multiple third party security systems, including the Interlogix Concord 4 and NetworX systems, Honeywell Vista 15p/20p/21ip systems, DSC Power Series Neo and others (Refer to the third party systems website at www.legrand.us/home-automation/intuity-third-party-systems... - Page 14 The Jumper positions need to be set opposite of the default on the NX-584 Automation Module: J7 = B J8 = A J9 = A J10 = B 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343 www.legrand.us...
- Page 15 For the DSC Power Series Neo, the TL280 (R) Alarm Panel Communicator is required. The R revision is important as it contains the correct serial interface that allows for communication to the Intuity Home Automation System. It is recommended that v5.0 of the communicator is installed. The TL280 (RE) is also compatible but requires additional changes in the setup.
-
Page 16: Ip Camera Subsystem
2.6 IP Camera Subsystem The Legrand Intuity System is designed to support either of the Legrand IP Cameras (CM7000/ CM7100) and the Legrand CM2001 IP Server. The installation sheets included with these – (P/N 1507215), CM7100 – (P/N 1507216) and CM2001 –... -
Page 17: App Downloads
There are two iOS/Android Apps available from the iTunes Store or the Google Play Store associated with the Intuity System. The apps are as follows: The Legrand Digital Audio App (this one may have been previously downloaded when the Legrand Digital Audio System was installed and configured). -
Page 18: Intuity Account Creation
Once complete, agree to the “End User License Agreement” and press “Done”. Legrand will now send a confirmation email to the email address entered with an embedded activation link. Have the customer tap on the link and their account will be activated. -
Page 19: Register The System (Ha7000 Intuity Controller)
Name the controller and enter the zip code. Then tap “Done”. A screen will appear indicating that “The controller was successfully registered”. Tap “Get Started” to begin configuring the system. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343 www.legrand.us... -
Page 20: Add/Configure Rooms/Users
It is recommended to have all rooms named before adding devices. Devices can then be assigned to a room as they are added. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. -
Page 21: Add/Configure Users
Then, click the “+” icon in the upper right corner to add a user. Type in the user’s credentials and click the check mark to save. The result page below will display the new user. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343 www.legrand.us... -
Page 22: Adding Wireless Devices
The WiFi to RFLC Bridge will act as a WiFi Hotspot when first connected to power. Its Power SSID is Legrand Bridge XXXX (XXXX are WiFi the last 4 digits of its MAC address which can be found on the label on the back of the unit). - Page 23 Step 4b – Go to the WiFi settings on the Tablet/Laptop and search for the Legrand Bridge (as shown below). Note: The Bridges name can be found on the label on the back of the Bridge itself. Step 4c – Select the Legrand Bridge and enter the Bridge’s WiFi password (“PASSWORD”) to connect the Tablet/Laptop to the Bridge.
- Page 24 ** As of Intuity release 2.1.1, bridge updates will happen automatically and will not require manual updating. ** 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343...
-
Page 25: Add A Wifi To Rflc Bridge To Intuity
The discovery process will automatically time out after 60 seconds. If the device does not discover, please wait for the timeout, then try again. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. - Page 26 Step 5 - Click “Done”. The bottom “Hub” LED on the Bridge should be lit solid white (Bridge is now paired to the Intuity system). 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved.
-
Page 27: Add Rflc Devices
6.1.3 Add RFLC Devices Step 1 - Get the House ID for the RFLC lights by clicking “Device Assistant” / “List of Devices” / “Legrand RFLC Device Adapter”. Step 2 - Scroll Down and click on “Get House ID”. Step 3 - Go to an RFLC Dimmer/Switch and turn it on and off. - Page 28 Repeat Step 6 for all Master Dimmer/Switches. (Devices connected to a load). 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved.
-
Page 29: Scene Controllers
Scene Controllers (part numbers LC2303-WH, LC2303-LA and LC2303-NI). radiant Style adorne SoftTap The new Scene Controllers can be added to the Intuity Home Automation System by using the same steps provided in Section 6.1.3 Add RFLC Devices . The addition of a scene controller to the Intuity Home System will allow for the buttons on the device to function as device triggers for an activity. -
Page 30: Adding A Wifi To Z-Wave Bridge
The WiFi to Z-Wave Bridge will act as a WiFi Hotspot when first connected to Power power. Its SSID is Legrand Bridge XXXX WiFi (XXXX are the last 4 digits of its MAC address which can be found on the label on the back of the unit). - Page 31 Step 4b – Go to the WiFi settings on the Tablet/Laptop and search for the Legrand Bridge (as shown below). Note: The Bridges name can be found on the label on the back of the Bridge itself. Step 4c – Select the Legrand Bridge and enter the Bridge’s WiFi password (“PASSWORD”) to connect the Tablet/Laptop to the Bridge.
-
Page 32: Add Wifi To Z-Wave Bridge To Intuity System
Step 1 - To add the WiFi to Z-Wave Bridge to the Intuity System, open the home page of the web browser. Click on “Device Assistant” (1), then click “Add Device” (2), and then click “Add Manually” (3). 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343 www.legrand.us... - Page 33 Step 4 - Just press “Done” and the bottom LED on the Bridge should be lit solid (Bridge is now paired to Intuity system). When completed, all three LED’s on the bridge will be solid white. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved.
-
Page 34: Removing Z-Wave Device Id
Notice the prompt “Waiting for device to be Pressed” ..Step 3 - Go to the device and press its pairing button. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343... - Page 35 Notice the prompt. The prompt shows that it was successfully removed. Repeat Steps 1-3 for all Z-Wave devices. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343 www.legrand.us...
-
Page 36: Adding A Z-Wave Device To Intuity
NOTE: For a list of compatible third party Z-Wave devices, please visit our Intuity Third Party Systems page at: http://www.legrand.us/home-automation/intuity-third-party- systems 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343... -
Page 37: Adding Wireless Thermostats
Open the home page of the browser and click on “Device Assistant” (1), then click “Add Device” (2) and click “Add Manually” (3). Select the “Honeywell WiFi Thermostat” Adapter, and press the “Add” button. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343 www.legrand.us... - Page 38 When the Status screen says “Finished Search…” Press “Done”. Select “Configure Device”. Enter the login credentials for the Honeywell thermostat and press “Add All”. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343 www.legrand.us...
- Page 39 For Honeywell Prestige IAQ 2.0 (RedLINK): The following procedure outlines the standard configuration of the Honeywell Prestige® IAQ 2.0 Thermostat for use with the Legrand Intuity Home Automation System. Equipment installation will be in accordance with the instructions provided by Honeywell.
- Page 40 Intuity System. All individual thermostats on the Honeywell user account will be added to the system at this time. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved.
- Page 41 NOTE: The Thermostat Temperature Sensor associated with the thermostat will be removed when the thermostat is removed in this step. No further action is required. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved.
- Page 42 Nest. Once the username and password has been registered with Nest, press the “Authorize” button in the Intuity app to allow the Intuity Controller to connect to the Nest Thermostat(s). 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343 www.legrand.us...
- Page 43 Next, you will be prompted to enter the account information for Nest. Enter the username and password that was created to pair the Nest Thermostat(s) with the Nest app. Press the “Sign In” button to proceed. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343 www.legrand.us...
- Page 44 The Intuity system will confirm that the Nest Thermostat has now been authorized to communicate with the Legrand hub (the HA7000). Close the page to complete the authorization process by pressing the “X” icon. The final step is to add the Nest Thermostat(s) to the Intuity System. Press the “Add” button to begin the search process.
-
Page 45: Add A Z-Wave Thermostat Or Garage Door Opener To The Intuity System
To add a Z-Wave thermostat or garage door opener to the system, follow the instructions given in section 6.2.4 “Adding a Z-Wave Device to Intuity”. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. -
Page 46: Adding Qmotion Shades
If the QMotion shades have been properly configured prior to Intuity being commissioned, all of the previously configured shades should appear automatically. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343 www.legrand.us... - Page 47 Verify that all of the shades are listed and are controllable in the menu screen. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343 www.legrand.us...
-
Page 48: Adding Wired Devices
Option Flags – Use Default [Off = Binary] Baud Rate – 6 = 38400 [38.4k] Enabling the Transitions (2 Segments): 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343... - Page 49 Program Code (9713 default). Enter the address 0# for the control panel. Finally, Location 23 – Segment 1- Enable option 1 to allow quick arm. NOTE: For further assistance with Security Configuration, contact Legrand Technical Support or the Security System Installer.
- Page 50 NOTE: After making the changes for the TL280RE Communicator board, it may be necessary to reboot the security controller before adding the security panel to the Intuity System. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved.
- Page 51 1. Go to “Device Assistant” from the home page. 2. Select “List of Devices”. 3. Select the “Security Alarm Adapter” 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343...
- Page 52 Partition. NOTE: If Quick Arm is enabled in the Intuity App, it must also be enabled in the security systems programming. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343 www.legrand.us...
-
Page 53: Adding Ip Cameras
7.2 Adding IP Cameras Legrand IP Cameras are UPnP devices. They are discovered and added automatically when attached to the Intuity System after 1-15 minutes. NOTE: Cameras cannot be viewed from the Intuity web browser Interface. 7.2.1 Adding remote viewing to IP Cameras To add remote viewing capability, open the home page and click on “Device Assistant”, then... -
Page 54: Adding A Digital Audio Subsystem
7.3 Adding a Digital Audio Subsystem To add the Legrand Digital Audio subsystem to Intuity, from the home page of the browser click on “Device Assistant” (1), then click “Add Device” (2) and then click “Add Manually” (3). Click on “Legrand Digital Audio Device Adapter” and then click “Add”. -
Page 55: Adding Intercom System Door Units
7.4 Adding Intercom System Door Units To add the Legrand Intercom System Door Units (up to 4), simply ring each door bell, and they will be discovered and added to the “Device List”. Configure the system by naming the door units and assigning them to rooms. -
Page 56: Creating Activities
The following activity example is based around the triggering event of a doorbell ring. For additional information on activities and many more examples, please refer to the Legrand Intuity User Guide (P/N 1308241). - Page 57 The reason for this activity is “doorbell rings”. Select the days and times (maybe it should happen only while at work for instance) and click “Set”. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved.
- Page 58 This activity might not be useful when at home, or asleep, but that is really up to the customer to decide. Click “Choose” to continue. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved.
- Page 59 (“Someone at the front door” for example). Select “Push” notifications and choose what action occurs when someone opens notification on their mobile device (such as viewing the door camera). Select “Finish” when done. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343 www.legrand.us...
-
Page 60: Appendix A: Faq
Bridge for 2 seconds with a paper clip. If the Bridge still does not appear to Factory Default, repeat steps above or call Legrand Technical Support for further assistance. NOTE: Pressing the recessed Reset button on the front of the Bridge for 2 seconds with a paper clip power cycles the Bridge. - Page 61 Legrand Technical Support. 9. How do I Reboot the Intuity Controller? We recommend contacting Legrand Technical Support if it is felt a reboot should be performed. The system can be rebooted via a power cycle or via the web browser (refer to Appendix B4/7).
- Page 62 (https://intuity.legrand.us). Refer to Appendix B1/2. 12. How do I un-register the Controller (i.e. Homeowner is moving)? This can be done from the web browser (https://intuity.legrand.us). Refer to Appendix B4. 13. How do I change the system Date/Time/Zip code? This can be performed from the web browser (https://intuity.legrand.us). Refer to Appendix 14.
-
Page 63: Appendix B: Advanced System Commissioning
The Intuity System is designed to be controlled from “smart” devices such as the iPad Mini based Command Center or a mobile iPhone, Android device, etc. through the use of the Legrand Intuity App. However, there are functions that require a browser-based control method, such as changing the Date and Time, or changing the User ID or Password, or Re-naming an Intuity Account. - Page 64 Authorized Mobile Devices. Notice that any device on the list can have its authorization revoked by pressing the “Disconnect” button. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved.
- Page 65 Name, its Location and even Time Zone, click on “Controller Settings” at the top right of the “Home Screen”. NOTE: Only US Time Zones (zip codes) are currently supported. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343 www.legrand.us...
- Page 66 Select the type (Protocol Adapter) of the device you wish to remove and select the actual device to remove on the next screen (we’re using the Honeywell WiFi thermostat as an example). 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved.
- Page 67 NOTE: To remove Z-Wave devices, the pairing button on the device itself must be pressed after the “Remove Device” selection has been made in the WiFi to Z-Wave adapter. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved.
- Page 68 Cameras IP address and Port (i.e. 192.168.40.103:8090) Notice at the top right of the screen, there is a Controller Settings button, and an Account button. 301 Fulling Mill Road, Suite G ©Copyright 2015 by Legrand, Middletown, PA 17057 Inc All Rights Reserved. Page (800) 321-2343 www.legrand.us...