Adding Intercom System Door Units - LEGRAND Intuity Home Automation System Installation Manual

NOTE: Digital Audio Zone names should be setup through the Digital Audio App first. The
zone names will then transfer to the Intuity System when above steps are performed.
Should you need to change the zone names in the Digital Audio App after adding them to
Intuity, you will need to remove the "Legrand Digital Audio Device Adapter" from the list of
devices and then follow the outlined steps above to add the system to Intuity again.

7.4 Adding Intercom System Door Units

To add the Legrand Intercom System Door Units (up to 4), simply ring each door bell, and they will
be discovered and added to the "Device List". Configure the system by naming the door units and
assigning them to rooms.
301 Fulling Mill Road, Suite G
Middletown, PA 17057
51
Page
(800) 321-2343
©Copyright 2015 by Legrand,
Inc All Rights Reserved.
www.legrand.us