LEGRAND Intuity Home Automation System Installation Manual page 14

For the Interlogix Concord 4 System, the SB2000 Automation Module (Part# 60-783-02) is
required. A DB9 to RJ45 plug-in adapter is supplied with the
allow a direct connection from the Intuity Controller into the SB2000.
For the Interlogix NetworX Security System, an NX-584 Automation Module is required.
Please refer to the manual that is supplied with the NX-584 Automation Module for further
instructions on setup.
The following must be configured on the NX-584:
The Jumper positions need to be set opposite of the default on the NX-584 Automation Module:

J7 = B

J8 = A

J9 = A

J10 = B
HA7000
301 Fulling Mill Road, Suite G
Middletown, PA 17057
10
Page
(800) 321-2343
Intuity Controller that will
©Copyright 2015 by Legrand,
Inc All Rights Reserved.
www.legrand.us