Table 1- 5: Oscilloscope Environmental Characteristics - Tektronix TPS2000 Series Service Manual

Specifications

Table 1- 5: Oscilloscope environmental characteristics

Temperature p
Humidity y
Cooling Method
Altitude, Operating and
Nonoperating
Random Vibration
Mechanical Shock,
1
operating
1
With one battery pack installed.
Charge the battery packs within an ambient temperature range of 0 °C to 45 °C (32 °F to 113 °F). Charging battery packs
2
outside of this range can damage cells or cause them to leak.
The battery packs are rated to operate between - 10 °C and +50 °C (- 14 °F and +122 °F) with less than 80% relative
3
humidity. Operating outside of this range can cause damage. Battery discharge capacity drops significantly at tempera-
tures below 0 °C (32 °F) and above 45 °C (113 °F).
4
Wet bulb.
1- 8
2
Operating
0 °C to 50 °C (32 °F to 122 °F)
3
Operating
60% RH: 30 °C to 50 °C (86 °F to 122 °F )
Forced air, temperature controlled.
3,000 m (10,000 ft)
Operating
0.31 g from 5 Hz to 500 Hz, 10 minutes on
RMS
each axis.
50 g, 11 ms, half sine
Nonoperating
- - 40 °C to +71 °C (- - 40 °F to 159.8 °F)
Nonoperating
60% RH: 55 °C to 71 °C (131 °F to 160 °F)
≤90% RH
Nonoperating
2.46 g
each axis.
TPS2000 Series Digital Storage Oscilloscopes Service Manual
2
3
: 0 °C to 30 °C (32 °F to 86 °F)
4
from 5 Hz to 500 Hz, 10 minutes on
RMS