Using The Replaceable Parts List; Abbreviations; Table 10- -1: Parts List Column Descriptions - Tektronix TPS2000 Series Service Manual

Replaceable Parts

Using the Replaceable Parts List

Table 10- - 1: Parts list column descriptions
Column Column name
1 Figure & Index Number
2 Tektronix Part Number
3 and 4 Serial Number
5 Qty
6 Name & Description
7 Mfr. Code
8 Mfr. Part Number

Abbreviations

10- - 2
This section contains a list of the mechanical and electrical components that are
replaceable for the oscilloscope. Use this list to identify and order replacement
parts.
Table 10- -1 describes each column in the parts list.
Description
Items in this section are referenced by figure and index numbers to the exploded view illustrations
that follow.
Use this part number when ordering replacement parts from Tektronix.
Column three indicates the serial number at which the part was first effective. Column four
indicates the serial number at which the part was discontinued. No entries indicates the part is
good for all serial numbers.
This indicates the quantity of parts used.
An item name is separated from the description by a colon (:). Because of space limitations, an
item name may sometimes appear as incomplete. Use the U.S. Federal Catalog handbook H6-1
for further item name identification.
This indicates the code of the actual manufacturer of the part.
This indicates the actual manufacturer's or vendor's part number.
Abbreviations conform to American National Standard ANSI Y1.1- -1972.
TPS2000 Series Digital Storage Oscilloscopes Service Manual