Subscriber Settings - Aastra Ascotel Office 45 Operating Instructions Manual

Settings with the System Assistant

Subscriber Settings

Lets you change the following settings for any given phone number:
• Name
• Busy lamp field
• Hotline allocation
• Call Forwarding Unconditional
• Call Forwarding on No Reply
• Pager number
• Ringing pattern for the general bell
• Cost centre
• Digit barring
• Phone lock
Depending on the type of subscriber (ordinary phone, handset, pager, pager, PISN), only certain menu
items will be available. This means that only the following items can be changed when using a private
phone network/PISN (Private Integrated Services Network):
• Name
• Route number
• PISN phone numbers
• CLIP selection
The phone number cannot be changed in the System Assistant.
Before you can make changes to the subscriber settings, you need to select "CHANGE" in the "Subscriber
Settings" menu, type in the existing phone number and confirm by pressing the "OK" Foxkey.
Changing a Subscriber Name
Menu path: 4-Subscriber settings/2-Modify/Phone number/1-Name
Lets you change name entries in the subscriber list. The names listed here are used for dialling by name
in the system.
A name can consist of up to 17 characters and must start with a letter.
Changing the Busy Lamp Field
Menu path: 4-Subscriber settings/2-Modify/Phone number/2-Busy lamp field (45 / 45pro only)
Lets you assign the variant of a busy lamp field to a 45 / 45pro phone.
This menu item does not appear for other phone types. Depending on the size of the system you can
choose between 4 or 10 variants. Under each variant you can indicate whether up to 25 phone numbers
are either busy or free.
21