Table of Contents
Advertisement
Settings with the System Assistant
System Status and Event Messages
Menu path: 6-Maintenance settings/3-Maintenance
The information can be processed with any of the following commands: "VIEW", "PRINT", "DELETE",
or "BOTH" (Print, followed by Delete). You must specify the function you want before selecting the data.
You can choose the following items:
• 1-Status line
• 2-System failures with indication of the date, time, and frequency
• 3-Mains power failures with indication of the date, time, and frequency
• 4-Event messages, the last 84, with indication of the date, time and frequency
Changing the Licensing
Menu path: 6-Maintenance settings/4-Licensing/2-Modify/2x Foxkey "->"/1-LIC
Lets you enter a new licence code (LIC), acquired to expand your system functions.
Your system's functions are enabled using a licence code. To be able to use other functions, you need to
overwrite the existing code with a new licence code. Once you order the desired functions, you will
receive the new code from your dealer. To generate the new licence code, your dealer will need your
system's identification information, which is contained in this menu. The licensed functions will be
enabled once the system has been restarted. This can be done by your dealer using remote maintenance.
Enter the new licence code using the System Assistant or AIMS. If you have the new licence code
electronically, we recommend you to enter it using AIMS by copy and paste.
The identification information can be selected with the "->" Foxkey. It comprises the following
information:
• The system's serial number, EID (Equipment Identification)
• Country and sales channel information, CID (Channel Identification)
• The hardware address of the Ethernet interface, MAC (Media Access Control)
• The licence code (LIC), not available when the system is supplied without the functions enabled.
The "Licences" menu item contains a list of the licensed features.
Changing the Time
Menu path: 6-Maintenance settings/5-Date/Time/2-System time
Lets you change the system time.
The new time has to be entered as "hh.mm". If you are not using an alpha keyboard, you can enter the
full stop with the "*"-key.
Changing the Date
Menu path: 6-Maintenance settings/5-Date/Time/3-System date
Lets you change the system date.
The new time has to be entered as "DD.MM.YY". If you are not using an alpha keyboard, you can enter
the full stops with the "*"-key.
26
Advertisement
Table of Contents
