Settings In "Look Around Mode - Aastra 400 Series User Manual

DECT Measuring Device ME-8 (test kit)
6. 3. 1. 2

Settings in "Look Around Mode"

Selecting a DECT System
1. In "Look Around Mode" press the "M" key repeatedly until "System" appears
2. Press Foxkey "System"
3. Use the Foxkey ">" to select the system designation
4. Confirm with Foxkey "OK"
Tip:
Long-click 1 to change the system.
Tab. 4 Significance of the system designations:
Designation Icon
A, B, C, D A, B, C, D
E E
Test T
Xall X
Note:
The selected system is permanently saved and is maintained even after switching
off the cordless phone.
58
Meaning
Systems of the valid cordless
phone registrations
Saved system
Test system
All systems
Note
Only visible if the cordless phonr is regis-
tered in these systems
Visible only if a system was previously saved
(see section "Saving a System
Contains only the visible test radio units in
measuring mode
Contains all visible radio units
Planning Aastra 400 DECT systems as of R1.0
syd-0457/1.0 – R1.0 – 10.2012
ID:")