Maid Status - Answerback - NEC NEAX2400 IMX Features Manual

M-68
General Description
This feature allows a maid or other hotel personnel to receive answerback acknowledgment from the PMS (Property
Management System) computer when MAID STATUS has been changed using guest room station or Special
Administration Station telephones.
Operating Procedure
• Service setting from a guest room station by a maid or repairman:
Step
1 Lift handset.
Enter a Maid Status code (corresponding to one
2 of the Maid Status conditions programmed via
MAT) by dial operation.
Note: In case of using a D
Sell," or "Out of Service" status is entered, the following will display:
Service setting from a Special Administration Station:
•
Step
1 Lift handset.
Enter a Maid Status code (corresponding to one
2 of the Maid Status conditions programmed via
MAT) by dial operation.
3 Dial the guest room station number.
To repeat the same status for another guest room
station, repeat Step 3.
Service Conditions
1. This service is activated only when Maid Status is entered through dial operation from a guest room station
or Special Administration Station telephone.
2. Maid Status information depends upon the PMS computer software.
3. Reorder tone will be heard instead of service set tone if the PMS does not respond within 30 seconds or
sends a negative answer to the NEAX2400 IMX.
4. This service feature is compatible with the MAID STATUS [M-22] feature; both can coexist in the same
system.
5. Model 90 or Model 120 PMS is required for this feature.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2

Maid Status - Answerback

Maid Status - Answerback
Action
term
for a guest station, if the Maid Status code of the "To Be Cleaned," "Cleaned," "Ready to
(Time and Date)
Action
Hear dial tone.
Hear service set tone (answerback).
SET
>>>
Hear dial tone.
Hear special dial tone.
Hear service set tone (answerback).
Result
(Note)
Result
Page 113
M-68