NEC NEAX2400 IMX Features Manual page 145

Service Conditions (cont'd)
7. The station number displayed on the D
regardless of the telephone used in the suite room.
8. There is no limitation to the number of suites in a system.
9. If digital remote units are used for suite room service, ringing cannot be synchronized.
10. PMS registers all hospitality activity against the primary station.
a.) Maid service – May be dialed from any suite room phone.
b.) MESSAGE WAITING [M-6] – This feature is set or cancelled against the primary station or
phantom number. When set, all suite room stations will display the MESSAGE WAITING [M-6]
indication.
c.) AUTOMATIC WAKE-UP [A-10] – This feature is set or cancelled against the primary station.
When the wake-up call arrives, it will ring all suite room phones.
d.) DO NOT DISTURB [D-11] and ROOM CUTOFF [R-9] – These features are set or cancelled
against the primary station or phantom number.
11. When the Console dials the primary station, the DSS keys and lamps are used in the operation. The status
of the suite room phones appear on the DSS lamps. Ringing is generated at the suite room phones when
the START key is pressed. If a primary or subsidiary phone DSS key is pressed, only the corresponding
phone will ring. A busy suite room station will show flashing on the DSS lamp and an idle suite room
phone will show solid.
Figure 15 DSS Busy Lamps on Attendant Console and Desk Console
12. When the Console dials a secondary station, the status of that station displays on the first DSS key only.
To initiate ringing at the secondary station, the attendant must press the first DSS key or the START key.
13. A delay will occur between the time the station status is displayed on the Console and the time the
attendant presses the DSS or START key. The status is not updated. Blocking may occur because another
station in the system has called the primary or secondary station.
14. A system option allows for only the primary station to ring in a suite room. Any phone in the suite room
may still answer.
15. Console and D
station connected.
16. Ringing cycles are controlled by the line card. If suite rooms are not serviced by a common line card, ring
will not be synchronized.
17. For the DIRECT STATION SELECTION (DSS) [D-26] display to be available, the GUEST ROOM
CALLING – HOTEL ATTENDANT [G-11] must be programmed into the system data.
term
18. When a D
term
a.) The D
b.) MULTIPLE LINE OPERATION – D
term
c.) The D
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Suite Room Service
7500 7501 7502 7503
Secondaries
Primary
term
called number displays will show the primary station only, regardless of the actual
is used in a suite:
must have the my line.
should be designated as the primary station of the suite room.
term
or Console is the primary station number or phantom number,
term
[M-20D] service is available.
M1 S2
S2
S3
S3 S4
S4
M1
DSS/BLF keys on
Desk Console
S-75
Page 133