NEC NEAX2400 IMX Features Manual page 114

H-22
Service Conditions (cont'd)
16. The day/night mode changeover is performed by the NITE key in the office where the Console is placed,
and by the external key in the other offices. Before leaving, the Attendant should press the NITE key and
answer all the terminating calls.
17. When NAME DISPLAY – SYSTEM – CCIS [N-36] and Guest Name Display over CCIS are both
available, NAME DISPLAY – SYSTEM – CCIS [N-36] has precedence. However, NAME DISPLAY –
SYSTEM – CCIS [N-36] is not available to the guest stations.
18. Announcement machines for wake-up must be connected in each office.
19. The following table shows which hotel services are available over CCIS (
20. Automatic Wake-Up Hotel Attendant Assistance [A-58] is not available in the distant office.
21. Administration Name Display is not available to Hotel ATTCON over CCIS.
Index
A-15 Announcement Service
A-26 Audit Reports
A-27 Automatic Wake-Up
A-47 Attendant Console with Hospitality Functions
A-48 Automatic Message Waiting lamp Off
A-57 Alert Service
A-58 Automatic Wake-Up – Hotel Attendant Assistance
A-73 Automatic Multiple Attendant Recall
Answering Camp-On/Call Hold Calls by Switch Hook
A-74
Flash
A-75 Automated Guest Station Voice Mail Retrieval
B-26 Busy Status Display – Hotel Attendant
C-19 Calendar Display
C-23 Check-In/Check-Out
C-32 Calling Station Number Display
C-62 Consecutive Speed Calling – System
C-71 Called Number Display – Hotel Attendant Console
C-72 Connecting Room Service
D-11 Do Not Disturb
D-15 Day/Night Class of Service
D-23 Direct Page Connection
D-24 Direct Paging
D-25 Direct Service Set/Reset
D-26 Direct Station Selection
D-88 Directory Assistance Interface
D-89 Direct Selection – Outside
term
D-105
D with Hospitality Functions
D-107 Direct Data Entry – Station
Page 102
Feature Transparency Over CCIS
Table 5 Available Hospitality Service Over CCIS
Feature Description
= USA and Canada only).
Available Remarks
X
—
X
X
—
—
—
—
—
—
X
—
Available from Console /
term
X*
D with Hospitality
Functions
X
X
X
—
The call is transferred to the
X* destination assigned in each
—
X
X
X
X
—
X
X
—
NEAX2400 IMX Hotel Features and Specifications
office.
NDA-24245, Issue 2