D-11D; Do Not Disturb - D Term - NEC NEAX2400 IMX Features Manual

D-11D

D-11D
General Description
This feature allows a guest room D
stations in DO NOT DISTURB (DND) mode.
Operating Procedure
To set DO NOT DISTURB from guest room D
•
Step
1 Lift handset or press the SPKR key.
Dial the DND set code.
2
3 Hang up.
To cancel DO NOT DISTURB from guest room D
•
Step
1 Lift handset or press the SPKR key.
Dial the DND cancel code.
2
Hang up.
3
To obtain a printout of stations in DO NOT DISTURB state, refer to the AUDIT REPORTS [A-26] feature
description.
Service Conditions
1. Setting and cancelling of DO NOT DISTURB is performed by key operations at the guest room D
2. An incoming call to a station in DO NOT DISTURB mode is routed to a reorder tone connection, a "Do
Not Disturb" announcement, or the Console, depending on the system data.
3. After the guest has checked out (CHECK-IN/CHECKOUT [C-23]), DO NOT DISTURB information is
automatically cleared.
4. A station in DO NOT DISTURB mode will be rung for AUTOMATIC WAKE-UP [A-10] service or for
ALERT SERVICE [A-57].
Page 58
Do Not Disturb - D
Do Not Disturb - D
term
to temporarily block incoming calls. Outgoing calls may still be placed from
Action
Action
term
term
s:
Receive Dial Tone.
Receive Service Set Tone. The LCD displays:
(Time and Date)
If the DO NOT DISTURB steady display is available by
system data, the following will be displayed:
(Time and Date)
term
s:
Receive Dial Tone.
Receive Service Set Tone. The LCD displays:
(Time and Date)
term
Result
DD SET
DD
Result
DD CNCL
NEAX2400 IMX Hotel Features and Specifications
>>>
>>>
>>>
term
.
NDA-24245, Issue 2