NEC NEAX2400 IMX Features Manual page 122

M-22
Operating Procedure (cont'd)
term
Note:
If a D is used for a guest station, the following will display:
Note 1: Reorder tone will be heard instead of service set tone if this feature is not accepted by the NEAX2400 IMX.
Note 2: Service set tone will be heard after the Maid Status access code is dialed, if the Maid ID code is not in service.
Note 3: If the Maid ID code is not in service, the following will be displayed on the LCD (if D
after the Maid Status access code is dialed:
Note 4: This display appears when the "To Be Cleaned," "Cleaned," "Ready to Sell," or "Out of Service" status is assigned.
• To set from the Console:
Step
1 Press the STS key.
2 Dial the guest room number.
3 Press ENTER.
4 Press the STS key again.
To change Maid Status information, press the
5
desired status code (1 – 9).
6 Press the ENTER key.
7 Press the EXIT key.
Note 1: Standard MAID STATUS codes 1-9, entered at the Console, are listed below:
1: To Be Cleaned
2: Cleaned
3: Ready to Sell
4: Out of Service
5: Not Used
6: Not Used
7: Not Used
8: Repair Needed
9: Repair Completed
Note 2: Actual MAID STATUS displays on the Attendant Console as an alpha-character (V, X, S, SC, etc.).
Service Conditions
1. When this service is activated, the identification code (if used) and room status are forwarded to the PMS
computer and stored in the HP memory until the next data for the room is entered. When MAID STATUS
is entered from a guest room station, a printout on the NEAX2400 IMX printer can be provided at the hotel
printer only when the PMS-NEAX2400 IMX communication link is closed.
Page 110
Maid Status
(Time and Date)
SET
(Time and Date)
Action
(Note 1)
SET RMS XXXX
>>>
>>>
The associated lamp illuminates.
The Console displays the guest room number.
Station status is displayed and the lamp flashes.
The most recent Maid Status information appears in
the top right hand corner of the room information
display.
The new status is displayed for confirmation.
The STS lamp flashes for confirmation.
The Maid Status indication and STS lamp are
extinguished.
NEAX2400 IMX Hotel Features and Specifications
term
is used for a guest station)
Result
(Note 2)
NDA-24245, Issue 2