Misfeed In The Lower Paper Tray; Misfeed In The Right Tray (When A Right Tray (Mx-Te10) Is Installed) - Sharp MX-M260 Operation Manual

Digital multifunctional system
Hide thumbs Also See for MX-M260:
Table of Contents

Advertisement

TROUBLESHOOTING AND MAINTENANCE

MISFEED IN THE LOWER PAPER TRAY

● Make sure that there is no misfed paper in the machine before pulling the tray out. (p.129)
● Use the following procedure to remove misfeeds that occur in the 500-sheet paper feed unit or 2 x 500-sheet paper
feed unit.
1
Open the lower side cover.
2
Remove the misfed paper.
MISFEED IN THE RIGHT TRAY
(when a right tray (MX-TE10) is installed)
1
Gently open the right tray cover.
2
Remove the misfed paper.
132
Downloaded From ManualsPrinter.com Manuals
Be careful not to tear the
misfed paper during
removal.
Be careful not to tear the
misfed paper during
removal.
3
If the misfed paper is not visible in
step 2, lift and pull out the lower paper
tray and remove the misfed paper.
4
Replace the lower paper tray.
Push the lower paper tray in completely.
5
Close the lower side cover.
3
Close the right tray cover.
Make sure that the misfeed message is cleared.
Be careful not to tear the
misfed paper during
removal.
Make sure that the
misfeed message is
cleared.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-m310

Table of Contents