Relationship Between The Power Save Mode And The Display And Machine Operations - Sharp FO-3800M Servise Manual

FO-3800M
Machine condition
Data reception from the host
Interruption copy during
printing
The printer cannot receive
Printer operation
print data. (OFFLINE)
The printer can receive
print data. (ONLINE)
The printer is receiving print
data.
Scanning cannot be
performed. (OFFLINE)
Scanner operation
Scanning can be
performed. (ONLINE)
During scan/preview
FAX key operating
Transmission image data
reading
During transmission (direct)
FAX operation During transmission
(memory)
During reception (direct)
During reception (memory)
FAX data printing
Telephoning

(3) Relationship between the power save mode and the display and machine operations

The power save mode is of two steps: the pre-heat mode and the power shut down mode. When the time set by user program 2 or 3 is passed from
the non-operation state, the machine enters the pre-heat mode and the power shut down mode.
Machine condition
Ready (Machine idle)
Power save Pre-heat mode
Power shut
down mode
(4) Consumable parts life and operation
When consumable parts life is approached, a warning display is made. When the photoconductor drum life is reached, the machine is forcibly
stopped.
Machine condition
Consumable Photoconductor
part empty cartridge life
(20K) over
Photoconductor
cartridge life
(19K) near
Toner empty
Paper empty
3 GREEN
ON
READY
LINE
LAMP SEGMENT
LAMP
LED
ON ON
ON/OFF BLINK
ON OFF
ON ON
ON BLINK
ON OFF
ON ON
OFF ON
ON ON
OFF OFF
OFF OFF
ON ON
ON OFF
ON ON
ON OFF
ON ON
OTHER
READY LAMP
LAMPS & LEDS
Current state
ON indicated
(No change)
Current state
ON
indicated
(No change)
OFF OFF
TONER
3 GREEN 7
READY CARTRIDGE
SEGMENT
LAMP REPLACEMENT
LED
LAMP
OFF —
ON —
ON — ON/BLINK
OFF P-BLINKING
TONER
PRE-
7 JAM CERTRIDGE
HEAT
LAMP REPLACE-
LAMP
MENT LAMP
— OFF OFF OFF
— OFF OFF OFF
— OFF OFF OFF
— OFF OFF OFF
— OFF OFF OFF
— OFF OFF OFF
— OFF OFF OFF
— OFF OFF OFF
— OFF OFF OFF
— OFF OFF OFF
— OFF OFF OFF
— OFF OFF OFF
— OFF OFF OFF
— OFF OFF OFF
— OFF OFF OFF
— OFF OFF OFF
FUSING
SECTION
CONTROL
160°C
80°C
OFF
DRUM
CARTRIDGE
REPLACEMENT
LAMP
When the life is reached during copying or
— BLINK printing, the job is completed and then the
machine is stopped.
— ON
The machine operation is not stopped. (However,
—
the print density is lowered.)
— — 3 GREEN 7 SEGMENT LED show "P."
6 – 2
DRUM
CERTRIDGE Copy
REPLACE- lamp
MENT LAMP
OFF ON
OFF ON
OFF ON
OFF ON
OFF ON
OFF ON
OFF ON
OFF ON
OFF ON
OFF ON
OFF ON
OFF ON
OFF ON
OFF ON
OFF ON
OFF ON
FAN Copy lamp
ON ON
ON OFF
OFF OFF
NOTE
NOTE
Other load
Normal
operation
OFF
OFF