Changing A Tray's Paper Size Setting - Sharp AL-1556 Operation Manual

CHANGING A TRAY'S PAPER SIZE SETTING

Follow these steps to change a tray's paper size setting.
• The paper size setting cannot be changed when the machine has
Note
stopped temporarily due to running out of paper or a misfeed.
• During printing (even in copy mode), the paper size setting cannot be
changed.
1
Press the [MENU] key.
Press the [
appears, and then press the [OK] key.
2
Press the [OK] key to select the tray.
3
Press the [
select the paper size, and then press the
[OK] key.
The paper size changes as follows each time the
[ ] key (
"A4"→"B5"→"A5"→"8,5x14"→"8,5x13"→"8,5x11"
→"5,5x8,5".
When you have finished configuring the tray's paper size setting,
Note
press the [MENU] key.
4
Squeeze the lock lever of the front guide and slide the front
guide to match the width of the paper, and move the left guide
to the appropriate slot as marked on the tray.
• The front guide is a slide-type guide. Grasp the locking knob on the guide
and slide the guide to the indicator line of the paper to be loaded.
• The left guide is an insert-type guide. Remove it and then insert it at the
indicator line of the paper to be loaded.
] key ( ) or [
] key ( ) or [
) or [ ] key ( ) is pressed:
Left
guide
] key ( ) until "PAPER SIZE"
] key ( ) to
Front
guide
PAPER SIZE
1:TRAY1
1,2,3,
1,2,3,
SP. FUNC
TRAY1
1:A4
1,2,3,
1,2,3,
SP. FUNC
2
23