Alarms; In The Event Of An Alarm; Suppress Alarm Tones; Setting Alarm Limits - Dräger Oxylog 3000 plus Pocket Manual

Software version 1.n
Hide thumbs Also See for Oxylog 3000 plus:
Table of Contents

Advertisement

Alarms

NOTE
The Oxylog 3000 plus Pocket Guide is not a replacement or substitute for the Instructions for Use.
Any use of the device requires full understanding and strict observation of the Instructions for Use.

In the event of an alarm

C
The indicator (A) flashes red or yellow, or lights up
yellow.
And
The alarm message appears on the upper right cor-
ner of the screen (C). In addition, alarm tones are is-
sued.
When the fault has been remedied the alarm tone is
cancelled.
Alarms, which have been remedied and remain on the
display, can be acknowledged (reset):
Press the Alarm Reset key (B).
The alarm message is now removed from the display.
Every alarm which has been remedied, but not acknow-
ledged, will be overwritten when a new alarm is issued.
Pocket Guide Oxylog 3000 plus
A
Oxylog 3000 plus
B

Suppress alarm tones

Press the key
.
The alarm indicator remains active and all alarm to-
nes are suppressed for approximately 2 minutes.
Alarm tones are resumed by the device after these
2 minutes.
If alarm tones are to be heard again before the
2 minutes have expired:
Press the key
again.

Setting alarm limits

Setting upper alarm limit for Paw
A
Set the maximum airway pressure Pmax via the
Pmax control (A).
Alarms
Oxylog 3000 plus
B
31

Advertisement

Table of Contents
loading

Table of Contents