Checking Software Version And Data Configuration; Checking The Board Configuration And Status On The Lmt - Huawei BTS3900 GSM Commissioning Manual

BTS3900(A) GSM
Commissioning Guide
In normal situations, after
switch over to the forward link. If the BTSs fail to switch over to the forward link automatically,
check the connections of the transmission cables, for example, the connections of the TX and
RX ends of the E1 cable.
----End

4.3 Checking Software Version and Data Configuration

This describes how to check software version and data configuration to ensure the correctness
of the software version and configuration data. The items to be checked are the configuration
and status of the board, the software version information, and the consistency between the
hardware installation and the data configuration.

4.3.1 Checking the Board Configuration and Status on the LMT

This describes how to check the configuration and status of the BTS boards.
4.3.2 Checking the Current Software Version on the LMT
This describes how to check the current software version of the boards and modules of the BTS.
4.3.3 Checking the Consistency Between Hardware Installation and Data Configuration
This describes how to check the consistency between hardware installation and data
configuration. The consistency is confirmed by checking the configuration and board status on
the LMT.
4.3.1 Checking the Board Configuration and Status on the LMT
This describes how to check the configuration and status of the BTS boards.
Procedure
Step 1 Click Site Device Panel to check the configured boards, as shown in
Issue 02 (2009-04-20)
CAUTION
Step 4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Commissioning the BTS (Transmission Available)
or Step 5 is performed, the cascaded BTSs will automatically
Figure 4-14.
4-11