Figure 5-10 Board Configuration Window - Huawei BTS3900 GSM Commissioning Manual

5 Commissioning the BTS (Transmission Unavailable)

Figure 5-10 Board Configuration window

Step 7 Set the parameters: On the SMT, the parameter of DEMU cannot be set. The parameters of
DEMU and DPMU are set by default, therefore, no parameter setting is required.
Step 8 Configure the APMU: The APMU is added for the BTS3900A GSM. Perform the following
steps to configure the new types of APMU, such as APM100 and APM30.
1.
2.
3.
4.
5-10
Click Board in the navigation pane.
The Board Configuration and Board Management windows are displayed.
Double-click Board Management. The Board Management window is displayed.
In the Board Management window, right-click APMU, and then click Parameter
Management.
The Parameter Management dialog box is displayed.
In the Parameter Management dialog box, click Parameter Set. Select APM30 or other
boards under APMU Type according to the configuration data, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
BTS3900(A) GSM
Commissioning Guide
Figure 5-11.
Issue 02 (2009-04-20)