Checking The Bts Environment Alarms; Bts Environment Alarm Types - Huawei BTS3900 GSM Commissioning Manual

4 Commissioning the BTS (Transmission Available)
Procedure
Step 1 Activate the GPRS or EGPRS data service with the MS. Then, commission PS services through
multi-service testing. The PS service test involves sending multimedia message, browsing
websites, and downloading files.
Step 2 Check whether the MS can successfully send multimedia messages, browse webpages, and
download files.
If...
One of the three PS service tests is
successful
All the three PS service tests fail
Step 3 Repeat
----End

4.6 Checking the BTS Environment Alarms

This describes how to check the BTS environment alarms. It also describes how to monitor the
operating environment of the BTS.

4.6.1 BTS Environment Alarm Types

This describes the various types of environment alarms of the BTS. The alarms consist of the
fire alarm, smoke alarm, infrared alarm, water alarm, temperature alarm, humidity alarm, air-
conditioner alarm, door status alarm, and burglar alarm.
4.6.2 Checking the Environment Monitoring Alarms on the LMT
This describes how to check the environment monitoring alarms. Checking the environment
monitoring alarms is implemented through simulating the environment factors that may generate
alarms, thus checking whether the physical connections of the BTS can report and clear the
alarms. Note that the BTS technical support engineers should assist in checking the Boolean
environment monitoring alarm.
4.6.1 BTS Environment Alarm Types
This describes the various types of environment alarms of the BTS. The alarms consist of the
fire alarm, smoke alarm, infrared alarm, water alarm, temperature alarm, humidity alarm, air-
conditioner alarm, door status alarm, and burglar alarm.
4-26
Step 1 through Step 2 to test PS services in other cells under the BTS.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Then...
The hardware on the BTS side meets the
requirements for PS services.
Check whether the test MS works properly, for
example, the test MS is configured with the SIM
card or the SIM card supports authentication and
encryption.
BTS3900(A) GSM
Commissioning Guide
Issue 02 (2009-04-20)