BTS3900(A) GSM
Commissioning Guide
7.
8.
9.
10. Set Please select a point to split this RXU Chain to 2. Click OK, and then return to the
Issue 02 (2009-04-20)
Figure 6-12 Status of the disconnected TRX ring topology
Right-click the site, and choose Configure Site Board Attributes from the shortcut menu.
The Configure Site Boards Attributes dialog box is displayed.
Click Configure Site Board Attributes, the Site Device Attributes dialog box is
displayed.
Right-click the RXU chain, and choose Combine or Separate RXU Chain. The Split
RXU Chain dialog box is displayed, as shown in
Figure 6-13 Split RXU Chain dialog box
Site Device Attributes dialog box. The level 3 TRX is configured under the RXU link.
The start port is SFP1, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Optional Commissioning Tasks
Figure
6-13.
Figure
6-14.
6-17