Setting The Clock - Sharp R-86STM-A Operation Manual With Cookbook

Your oven has a 12 hour clock.
• To select the 12 hour clock, press the
KITCHEN TIMER/CLOCK SET key twice.
To set the time of day follow the instructions
opposite.
NOTES:
• Press the STOP/CLEAR key if you make a
mistake during programming.
• If you press any of the TIME keys too many
times, continue to press the key until the
desired time re-appears.
• To check the time of day during a cooking
process, press the KITCHEN TIMER/CLOCK
SET key and the time of day will remain on the
display as long as you keep your finger on the
key. This does not affect the cooking process.
• If the clock is set, when cooking is complete,
the display will show the correct time of day.
If the clock has not been set, the display will
only show ".0" when cooking is complete.
• If the electrical power supply to your
microwave oven is interrupted, the oven will
be save energy mode automatically after
the power is reinstated, and the display will
show nothing until the door is opened. If this
occurs during cooking, the programme will be
erased. The time of day will also be erased.
• When you want to reset the time of day, follow
the opposite example again.
R-86STM_EN.indd 8 R-86STM_EN.indd 8

SETTING THE CLOCK

1. Select the clock.
x2
2. Enter the hours by pressing the TIME keys.
3. Press the KITCHEN TIMER/CLOCK SET key
4. Enter the minutes by pressing the TIME keys.
5. To start the clock, press the KITCHEN
8
x2
once.
x1
TIMER/ CLOCK SET key once.
x1
2/19/08 4:50:30 PM 2/19/08 4:50:30 PM