Before Operating; Getting Started; Clock Setting - Sharp R45SVST Operation Manual

BEFORE OPERATING

Getting Started

Step Procedure
Plug the oven into a power point and
1
switch on the power.
Ensure the oven door is closed.

Clock Setting

* To enter the present time of day 11:34 ( AM or PM ) .
Step Procedure
Press the CLOCK/SET TIMER pad
1
once.
Enter the correct time of day by pressing
2
the numbers in sequence.
Press the START/+30SEC. pad.
3
This is a 12 hour clock. If you attempt to enter an incorrect clock time ( e.g. 13:45 ) , the clock would not be
active.
Press the STOP/CLEAR pad and re-enter the time of day ( e.g. 1:45 ) .
Pad Order
Pad Order
× 1
8
Display
Display