Network Configurations; Wired Network - Fanvil i51W User Manual

2) Long press the key to enter the menu [System Message] >> [QrCode], and log in to the web page with
the QR code scanned by the phone's own browser.
Users must enter the correct username and password to log into the web page. The default username and
password are "admin". Refer to the 10 Page Configuration for details on how to operate the page

6.4 Network Configurations

Fanvil i51W &i52W support two network connection modes: wired network connection and wireless network
connection. Users should choose the corresponding connection mode according to their own situation.
Devices use IP network connections to provide services. Unlike traditional devices based on line circuit
technology, IP devices exchange packets and data based on device IP addresses connected to each other over
the network.
6.4.1

Wired Network

To enable the device, you must first configure the network configuration correctly. Users need to press long
to enter the menu to configure the network. After entering the menu, users should follow the prompts to enter
[Network Settings] >> [Network].
Notice: If the user sees the
is not connected to the device's network port. Check that the cable connects the device to the network switch,
router, or modem.
There are two common IP configuration types for IPv4:
1) DHCP – This is the mode to automatically get the network configuration from the server. The user does
not need to manually configure any parameters. Suitable for most users.
2) Static IP –This option allows the user to manually configure each IP parameter, including IP address,
11
Picture3 – Login Page
"Network not connected" icon at the top of the screen, that means the cable