Alarm Reset - HNC Electric SV-E3 Series Instruction Manual

7.5 Alarm reset

7.5.1 Alarm reset (SVON=ON)
Figure 7.5.1 Alarm reset (SVON=ON)
Note 1) About I/O status, "C" indicates the internal output circuit contact and external contact is close, while "O" means open.
Note 2) The servo can be not ON when motor speed is less than 30rpm.
Note 3) T1 can be set in parameter No.238.0.(Initial value 4msec, value range: 0 to 500msec)
7.5.2 Alarm reset (SVON=OFF)
Figure 7.5.2 Alarm reset (SVON=OFF)
88