Auxiliary Function - HNC Electric SV-E3 Series Instruction Manual

mode. Please note that the newly-set parameters, which have been set in Parameter setting and auto tuning mode but not
saved to EEPROM, will disappear and return to the value before after power-off.
The operating procedures of saving parameters are shown below.
Figure 5.8.1 Parameter saving mode
In parameter setting mode when change the parameters that need restarting 24VDC control power supply, please restart the
control power supply after the above procedures done. The changed parameters become effective after restart control power
supply.(For the models of 1kW or more, power off the main circuit power supply and restart it after the screen display is off)

5.9 Auxiliary function

.
will display after press the MODE button seven times from the initial status
Please operate as the procedures shown in Figure 5.9.1.
Figure 5.9.1 Auxiliary function
54