At Occurrence Of Alarm - HNC Electric SV-E3 Series Instruction Manual

Note 1) About I/O status, "C" indicates the internal output circuit contact and external contact is close, while "O" means open.
Note 2) When servo OFF, it stops in the selected deceleration stop mode(Parameter No.224.0)..
Note 3) Immediate stop and short-circuit brake will finish when it meets the conditions of deceleration stop at servo OFF
(ParameterNo.224.1, 226.0, 227.0)
Note 4) MBRK will be OFF when the deceleration stop has completed or the motor speed is to reach the setting value
specified in parameter No.227.0. If deceleration stop mode is selected to the free-run (parameter No.224.0) at servo OFF, the
MBRK will be OFF when motor excitation is OFF.

7.4 At occurrence of alarm

Figure 7.4.1 At occurrence of alarm
86