Configure Serial Ports - Cardinal 825 Installation And Technical Manual

2. Configure Serial Ports

With the Configure Weight Server screen displayed, press the 2 key or use the Navigation
Keys to select (highlight) 2. Configure Serial Ports and then press the ENTER key.
The display will change to show the Select Serial screen.
Select Serial
Num Sc Type
Select Serial
With the Select Serial screen displayed, press the 1 key or use the Navigation Keys to
select (highlight) and then press the ENTER key to select Num 1. The display will change
to show the Setup Serial 1 screen.
Setup Serial 1
Enable:
With the Select Serial 1 screen displayed, the current setting for the Enable: parameter
will be shown. If the setting displayed is acceptable, proceed to the next parameter.
Otherwise, press the SPACE key to toggle its status. Select YES * to enable the serial
item or NO to disable the serial item and then press the  Down Arrow to advance to the
next parameter or press the ENTER key to save the new setting and return to the
previous screen.
 If Yes is selected for Enable:, the following additional parameters will be shown
(below the Enable: parameter) and requires data to be entered. Otherwise, press the
ENTER key to return to the Select Serial screen.
98
CONFIGURATION, CONT.
1. 0 On Demand
** Add Serial **
8545-M838-O1 Rev D  825 Installation & Technical
Port
COM1