CERTIFICATIONS / ID INFORMATION
To View the Certifications / ID Information
1. Press the ON/OFF key to turn on the 825. A self-test will be performed showing the
software versions and status of the option cards and then display the Startup screen.
2. Press the Navigation Keys Down Arrow to "advance" to (highlight) the Legal
metrology information / Setup option and then press the ENTER key or press the
3 key to select the Legal metrology information / Setup option. The display will
change to show the Legal metrology information / Setup screen.
3. With the Legal metrology information / Setup displayed, press the 2 key to select View
certifications / ID information or press the Down Arrow and then the
ENTER key to select View certifications / ID information. The display will
change to show the Certifications / ID Information screen.
130
8545-M838-O1 Rev D 825 Installation & Technical