PROAIM P-W5P24-BASE Assembly Manual page 8

24ft camera crane base kit

Hide thumbs Also See for P-W5P24-BASE:



Now join 3.7ft cable & 6.7ft Cable with Red Sleeves.



Attach the end of 6.7ft cable to one of the hook attached on front side of cable guide and another end

of 3.7ft cable with hook attached to 3rd section of jib.



Attach 14.5ft cable with Red Sleeves to hook attached on 1st section of jib and another end with 2nd

hook attached to cable guide as shown below.



Now join 3.7ft cable & 13.5ft cable with Blue sleeves.



Then attach the end of 13.5ft cable to wire tensioner with hooks attached to 6th section and another

end of 3.7ft cable with 2nd hook attached on 1st section.



Using the same approach attach cable to wire tensioner on another side of jib and one end with 3rd

hook on 1st section.



Now pass both side cables through space on bottom of cable guide support rod as shown below.